Bandwidth on the router netis

Настройка роутера Netis

On the page, you can create rules to limit inbound and outbound speed on the router devices netis.

 

Bandwidth management allows you to specify bandwidth management rules for individual applications or subnets. The rules can be set a certain amount of bandwidth. Bandwidth management applies to traffic flowing through the router interface. Bandwidth management applies to all traffic flowing through the router port, regardless of the source of the traffic. traffic redirection and IP aliases can cause traffic between LANs, which passes through a router, and therefore governed by bandwidth management.

Select the tab «Bandwidth Control» on the left side.

Bandwidth on the router netis

On the page, you can create rules to limit inbound and outbound speed on the router devices netis.

  • Bandwidth Control Configuration.
    • StatusEnable or Disable the function of bandwidth. The default is off.
    • Rule – Enter the incoming and outgoing speed. The speed is indicated in KB/s.
    • Click the Save button to save the changes in the settings.
  • Bandwidth Control Rule Settings.
    • Description – A brief description of the rule.
    • StatusEnable or Disable the function of bandwidth.
    • HostAll the hosts – to apply the rule to all recipients. Specific hosts – applied to the same destination, enter the IP-address of the recipient. Host’s subnet – is applied to the host subnet registers the IP-network address and subnet mask. Host’s Segment –  is applied to the range of the network, where the prescribed initial IP-address and End IP-address.
    • Guaranteed Bandwidth – This is the baud rate that the network agrees to maintain data under normal conditions in a particular virtual channel. The setting values can be different for different transmission directions.
    • Restricted Bandwidth – This is the baud rate at which the speed limit set for a particular virtual channel.
    • Click Add to add the rule.
  • Bandwidth Control List.
    • The list shows the bandwidth rules.
    • Click Modify or Delete, to modify or delete the rule bandwidth.
    • Click Delete All to delete all the rules.
Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.