DHCP settings on the router Tp-link

настройка роутера tp-link

LAN Settings on the router Tp-link: Mesh Range IP-address, the validity of the IP-addresses, the local gateway.

 

DHCP (Eng Dynamic Host Configuration Protocol.) – Dynamic Network Protocol setting allows computers to automatically receive IP-address and other parameters required to operate in a TCP / IP network. This protocol works on the model of the “client-server”. For automatic configuration, the client computer at the stage of the network device configuration refers to a so-called DHCP server, and receives from it the necessary parameters. The network administrator can set a range of addresses to be distributed among the server computers. This eliminates manual configuration of network computers and reduces errors.

Select «DHCP» tab – sub-tab «DHCP Settings» on the left side.

DHCP settings on the router Tp-link

LAN Settings on the router Tp-link: Mesh Range IP-address, the validity of the IP-addresses, the local gateway.

  • DHCP ServerEnable or Disable server. If you want to turn off the server, your network should be located other DHCP-server, otherwise you will need to specify the computer’s IP-address manually.
  • Start IP Address – the first address of the IP-address specified in this field. The default is 192.168.0.100.
  • End IP Address – The last address of the IP-addresses. The default is 192.168.0.199.
  • Address Lease Time – This is a period of time during which the network user can connect to the router using the current DHCP-address. Enter a time value in minutes, during which will be valid DHCP-address. The value can be set in the range of 1-2880 minutes. The default value is 120 minutes.
  • Default Gateway – (OPTIONAL) It is proposed to the IP-address of the router LAN-ports. Default: 192.168.0.1.
  • Default Domain – (OPTIONAL) You can specify a domain name for your network.
  • Primary DNS – (OPTIONAL) It is possible to the IP-address, the DNS server obtained from your ISP, or you can specify any of the workers, the DNS server (for example, the DNS-server of Google – 8.8.8.8)
  • Secondary DNS – (OPTIONAL) It is possible to the IP-address, DNS server obtained from your ISP, or you can specify any working DNS-server (eg, the second DNS server of Google – 8.8.4.4, secure DNS -server).

To use the DHCP-server is necessary for all the computers on the LAN function select “Get IP-address automatically”. The function will start to work only after a reboot of the router.

If the router does not give your device IP-address automatically, mount it manually by selecting from a range of free IP-address.

Click Save, to save the changes in the settings.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.