LAN (Local Area Network) to Tp-link router

настройка роутера tp-link

On this page you can configure the local network.

 

LAN (Local Area Network) – a computer network that connects several computers are in the same room, building on the router Tp-link.

Select the tab «Network» – sub-tab, «LAN» on the left side.

LAN (Local Area Network) to Tp-link router

On this page you can configure the local network.

  • MAC Address – The physical address of the LAN ports. The value can not be changed.
  • IP Address – Enter the IP-address of the router in dotted decimal points (default – 192.168.0.1).
  • Subnet Mask – Specifies the size of the network. Usually 255.255.255.0.
  • You can Enable or Disable IGMP Proxy function. By default, this feature is enabled.

If you change the IP-address on the LAN, you must use the new IP-address to log in to the router.
If a new IP-address on the LAN is not on the same subnet as the previous one, in the pool of the DHCP-server IP-addresses will be automatically amended accordingly, but the function Virtual Server and DMZ will not run until the necessary changes in their settings.

Click Save to save the settings.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.