Remote management router netis

Настройка роутера Netis

This page contains settings for remote control router netis.

 

To access the router, you must in your browser the IP-address on the WAN and through the colon is the port number that you specified in the field “Port Web Control.” For example, if the IP-address on the WAN of your device 26.100.12.8, and you specify the port number 8080, enter in your browser http://26.100.12.8:8080. You will need to enter the password to the router. After entering the correct password you will be taken to the router web management page.

To have remote management on the router, you must be a real the IP-address (the IP-address of the real – it is unique in the network is given by your ISP).

Select the tab «System Tools» – sub-tab «Remote Management» on the left side.

Remote management router netis WF2419.

This page contains settings for remote control router netis WF2419.

Select the tab «System Tools» – sub-tab «Remote Management» on the left side.

Remote management router netis WF2501.

This page contains settings for remote control router netis WF2501.

  • StatusEnable and Disable remote router management.
  • Port – Normally a web browser to access the standard port 80 HTTP service. For remote management of the router and port number is 80. For greater security, you can change this number to another by specifying it in the appropriate field. The port number must be in the range from 1 to 65535, but do not specify the port number for the standard services.

Click Save, to save the changes.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.