Setting the speed of the WAN port on the router netis

Настройка роутера Netis

On this page, adjust the speed of the WAN port on the router netis.

 

If there is a problem of Internet speed, it is advisable to check this option. We recommend to install in the “Auto” mode. If you moved the 100M in the Duplex and disappeared indication on the router or the internet stops working – the port on the equipment provider is set to 10MB, or there is a problem in the cable.

Select the tab «Advanced» – sub-tab «Port Setting» on the left side.

Setting the speed of the WAN port on the router netis WF2419.

On this page, adjust the speed of the WAN port on the router netis WF2419.

Select the tab «Network» – sub-tab «Port Settings» on the left side.

Setting the speed of the WAN port on the router netis WF2501.

On this page, adjust the speed of the WAN port on the router netis WF2501.

  • WAN port.
    • Auto – is set automatically, depending on the provider’s equipment and settings, and the same opportunities to work.
    • 10M Duplex (10Full) – mode, when the data transfer can be carried out simultaneously with the reception of data (sometimes also called “full duplex” in order to more clearly show the difference with the half-duplex). The total rate of information exchange over the communications channel in time can reach its maximum. For example, when Fast Ethernet technology is used at a rate of 10 Mbit / s, then the rate may be close to 20 Mbits / s (10 Mbit / s – and the transmission 10 Mbit / s – reception).
    • Half 10M (10Half) – mode, in which, unlike duplex, transmission is carried out on one communication channel in both directions, but with time division (each time transmission is conducted in one direction only). The total rate of information exchange via a communication channel in this mode is half the value in comparison with the duplex.
    • 100M Duplex (100Full) – mode, when the data transfer can be carried out simultaneously with the reception of data (sometimes also called “full duplex” in order to more clearly show the difference with the half-duplex). The total rate of information exchange over the communications channel in time can reach its maximum. For example, if you are using Fast Ethernet technology with a speed of 100 Mbit / s, then the rate may be close to 200 Mbit / s (100 Mbit / s – transmission and 100 Mbit / s – reception).
    • Half 100M (100Half) – mode, in which, unlike duplex, transmission is carried out on one communication channel in both directions, but with time division (each time transmission is conducted in one direction only). The total rate of information exchange via a communication channel in this mode is half the value in comparison with the duplex.
      LAN1, LAN2, LAN3, LAN4 Port – local ports on the router, you can specify the speed of the port.

Click Save, to save the changes.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.