Wi-Fi settings on the router netis

Настройка роутера Netis

The settings of the wireless mode on the router netis, the wireless network name, mode selection, channel coding, protection of wireless network.

 

Setting up a wireless network on the router netis.

Select the tab «Wireless» – sub-tab «Wireless Settings» from the left side.

Wi-Fi settings on the router netis WF2419

The settings of the wireless mode on the router netis WF2419, the wireless network name, mode selection, channel coding, protection of wireless network.

Select the tab «Wireless» – sub-tab «Wireless Settings» from the left side.

Wi-Fi settings on the router netis WF2501

The settings of the wireless mode on the router netis WF2501, the wireless network name, mode selection, channel coding, protection of wireless network.

Select the tab «Wireless» – sub-tab «Wireless Security» from the left side.

Security settings on the router netis WF2501

Security settings on the router netis WF2501

  • Wireless Settings.
    • Wireless StatusEnable and Disable wireless network router.
    • MAC Address.
    • Radio Mode – Specify the parameter Access Point.
    • Radio Band – If all the wireless devices connected to this wireless router uses the same wireless standard (802.11b at 2.4 GHz or 802.11a at 5GHz), you can select “Only (the indicates standard) “(for example, only to 2.4 GHz 11b or only the 5 GHz band for 802.11a). If you use a device that uses a standard wireless connection, select the “Mixed” mode.
    • SSID – Enter a value of up to 32 characters. This is the wireless network name (SSID) should be spelled out to all wireless devices in your network.
    • SSID Broadcast – Wireless router broadcasting can be enabled or disabled. If you turn on wireless broadcasting, wireless stations can connect to the router, otherwise they will not be able to connect to the router wirelessly.
    • Region – From the drop-down list, select your region. In this field, given the regions in which the use of a wireless router.
    • Channel – This field exhibiting the operating frequency you want to use. Wireless channel should be changed only if you see problems related to RF interference from other access point next to your equipment. If you choose the automatic mode, the AP independently automatically selects the most appropriate channel.
    • Channel Width – The capacity of the wireless channel capacity.
    • Control Sideband.
  • Client Security Settings (Wireless Security Settings).
    • Authentication Type – Specify the WPA / WPA2-PSK.
      • No – function wireless security can be disabled. If it is disabled, wireless stations can connect to the router without encryption. It is strongly recommended that you choose one of the options listed below to protect your wireless network.
      • WPA – Personal – Password PSK (Shared Key) WPA.
      • WPA2 – Personal – Password PSK (shared key) WPA2.
      • WPA / WPA2 – Personal – Select protection based on WPA Shared Key.
      • WEP – Select protection 802.11 WEP.
    • Encryption Type – You can choose either TKIP or AES.
    • Key Mode – You can enter the ASCII characters.
    • Password – You can enter the ASCII characters or hexadecimal format. The length should be between 8 and 64 characters if you select HEX format, and from 8 to 63 characters in the case of ASCII format selection.

Click Save, to save the changes in the settings.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.