Wireless Mode settings on the router Tp-link

настройка роутера tp-link

Wireless Mode settings on the router Tp-link, the wireless network name, mode selection, the channel region.

Select the tab «Wireless» – sub-tab «Wireless Settings» on the left side.

Wireless Mode settings on the router Tp-link

Wireless Mode settings on the router Tp-link, the wireless network name, mode selection, the channel region.

  • Wireless Network Name – Enter up to 32 characters. This is the wireless network name (SSID) should be spelled out to all wireless devices in your network.
  • Region – From the drop-down list, select your region. In this field, given the regions in which the use of wireless router features. It should be remembered that the use of a wireless router functions in the region, which is not specified in this list, it may be illegal. If your country or region is not listed, please contact the appropriate state agency for advice.
  • Mode – If all the wireless devices connected to this wireless router, use the same wireless standard (802.11b at 2.4 GHz or 802.11a at 5GHz), you can select “Only (the indicates standard) “(for example, only to 2.4 GHz 11b or only the 5 GHz band for 802.11a). If you use a device that uses a standard wireless connection, select the “Mixed” mode.
  • Channel Width – The capacity of the wireless channel capacity.
  • Channel – This field exhibiting the operating frequency you want to use. Wireless channel should be changed only if you see problems related to RF interference from other access point next to your equipment. If you choose the automatic mode, the AP independently automatically selects the most appropriate channel.
  • Enable Wireless Router Radio – The wireless router broadcast can be Enable or Disable. If you turn on wireless broadcasting, wireless stations can connect to the router, otherwise they will not be able to connect to the router wirelessly.
  • Enamle SSID Broadcast – If you check the box Enable SSID broadcast, the wireless router will be opened in wideband mode to transmit your name (SSID).
  • Enable WDS Bridging – With this option you can enable the WDS. This feature allows the router to combine the bridge two or more WLANs. If this box is checked, then you should check that the channel matches the channel of the access point to which the connection will occur.

Click Save  to save the settings.

Вы можете оставить комментарий, или ссылку на Ваш сайт.

Оставить комментарий

Вы должны быть авторизованы, чтобы разместить комментарий.